ClickSabi Pro
Solar Design
Where design data comes from, and its limits
Data sources, provenance, unresolved inputs and what ClickSabi does not certify.
Sources
Roof geometry, surface and irradiance inputs come from the mapped property and the reference datasets available for that location. The solar resource in use is labelled with the dataset it came from.
Shading
Shading can be imported or entered manually. Lidar and drone survey capture are marked coming soon and are not available.
Losses and corrections
Production uses the model's loss assumptions and temperature correction. Total losses and the DC to AC ratio are shown in the internal design review card on Results.
Unresolved inputs
Missing inputs are reported as incomplete and suppress dependent figures. No value is invented to fill the gap.
Not an engineering certification
Design output is a planning model. It is not a certified engineering result, it is not engineer-approved, and it is not a statement of code compliance.
Related articles
- Solar DesignEnergy inputs and the Results stepCapture usage and rates, then read production, offset and savings.
- Solar DesignStructural and mounting informationWhat structural facts are recorded and what they do not mean.
- Solar DesignStringing validation and errorsThe five validation outcomes and the failures that block a design.
- Solar DesignUnderstanding the solar design workflowThe seven guided steps and how a design reaches a proposal.
Didn't find what you were looking for?
Get in touch with the ClickSabi team or send feedback about the Help Center.
Prefer email? support@mail.clicksabi.com